Ice Fishing Transducer Selection Guide

Ice Fishing Transducer Selection Guide – Use This Guide to Find the Right Ice Fishing Transducer for Your Fish Finder


Garmin Dual Beam IF ice fishing transducer 77/200kHz – Operating frequency 77/200kHz, beam width 15-45 degrees.

Compatible devices: Garmin STRIKER series


Garmin GT8HW-IF CHIRP ice fishing transducer – Operating frequency 145/240kHz, beam width 16-24 degrees.

Compatible devices: Garmin STRIKER series, Echomap Plus, Echomap UHD, Echomap Ultra, newer GPSMAP devices.


Garmin GT10HN-IF ice fishing transducer – Operating frequency 130/300kHz, beam width 7-16 degrees.

Compatible devices: Garmin STRIKER series, Echomap Plus, Echomap UHD, Echomap Ultra, newer GPSMAP devices.


Lowrance ice fishing transducer HOOK2-4X – Operating frequency 200kHz

Compatible devices: HOOK2 4X and HOOK2 4X GPS devices.


Lowrance ice fishing transducer 9pin PTI-WBL – Operating frequency 83/200kHz and Chirp Med/High ranges

Compatible devices: 9pin Lowrance devices, HDS-Live, Elite TI / TI2 and Elite FS models.


Lowrance ice fishing transducer Hook2/Hook RV 5-7″ – Operating frequency 200kHz, beam width 20 degrees

Compatible devices: 5-12 inch devices of the Hook2 and Hook Reveal series; not suitable for the Hook2 series models 4X Bullet and 4X Bullet GPS


Lowrance ice fishing transducer 7pin PTI-WBL – Operating frequency 83/200kHz

Compatible devices: Lowrance devices with the blue 7-pin connector. Suitable for, among others, HDS GEN3 and other older devices with a blue 7-pin transducer connector. Please note that the new Elite Ti and Ti2, HDS Carbon and HDS Live units have a 9-pin connector.


Lowrance ice fishing transducer 7pin PTI-WSU – Operating frequency 83/200kHz, beam width 22-52 degrees.

Compatible devices: Black Uniplug connector; suitable for, among others, Elite, Mark and X series devices.


Humminbird XI 9 20 ice fishing transducer – Operating frequency 83/200kHz, beam width 20-60 degrees

Compatible devices: Helix series devices (not DI models).


Humminbird XI 9 1521 ice fishing transducer – Operating frequency 139/250kHz, beam width 15-21 degrees.

Compatible devices: All Helix CHIRP models with Ice mode.


Raymarine CPT-S ice fishing transducer – Operating frequency High Chirp

Compatible devices: Raymarine Element HV series devices. (Note: not suitable for Element S series devices) and Raymarine Dragonfly series devices. (If the Dragonfly device is a first-generation model with a red connector, adapter cable A80331 is required.)


References

Comstedt.se.fi

Lowrance.com/fi-fi/

Garmin.com/fi-FI/


Jarno Kangas, Fishing Content Creator / Blog Writer

You may also like